What Is the Safest Type of Space Heater?
There isn't a single safest type, and the data explains why. We make Kelvin, an infrared wall heater, so we'll show you where infrared sits in this picture, including the caution Consumer Reports attaches to it.
30% more cost effective than traditional heaters
Smart functions to automate home climate
Control remotely
Maintenance Free
Easy 5 minute installation
Kelvin - cost effective, smart electric heater
Stay warm and save more. Use code JONES15 to get 15% off your entire order—no strings attached.
Upgrade your comfort with a Kelvin today.
What "Safe" Actually Means
Start with what causes heater fires. The U.S. Fire Administration analyzed portable heater fires in homes from 2017 to 2019. The leading contributing factor to ignition, at 48%, was a heat source placed too close to something that could burn. Fires started most often in bedrooms (34%).
That makes distance, placement and features the main levers, not the label on the box. CPSC's 2019 to 2021 estimates also show most portable heater fires involve electric models: an average of 1,200 of 1,600 fires a year. Those are counts, not fires per heater, so they can't tell you which type is riskier.
Sources: U.S. Fire Administration, "Portable Heater Fires in Residential Buildings (2017-2019)" and CPSC, "2019-2021 Residential Fire Loss Estimates"
The Features That Matter More Than Type
Whatever type you choose, Consumer Reports and CPSC point to the same short list:
- Overheat protection. A sensor that shuts the heater off if it overheats.
- A tip-over shutoff on taller, floor-standing models.
- A lab label from UL Solutions, ETL (Intertek) or CSA.
- A cord that reaches the wall. CPSC says to plug electric heaters directly into a wall outlet, not an extension cord or power strip. Our guide to extension cords and space heaters explains why.
- Three feet of clearance from drapes, furniture and bedding, and off when you leave the room or go to bed.
Source: CPSC, "Keep Warm and Safe This Winter" (Jan 2026)
Where Kelvin Lands
Kelvin is an infrared heater, so Consumer Reports' caution about radiant heat applies to it: keep combustibles well clear, at least three feet, and don't mount it behind furniture or curtains. Our placement guide shows where to put it.
We designed around the same factors the data points to:
- No floor-standing risk. Kelvin mounts on the wall, so it can't be tipped over or kicked, and the mount, screws and drywall anchors are in the box.
- No fan and no plastic shell. The panel is aluminium and glass, and it runs silent.
- Overheat protection, with certification to UL and CE standards and FCC also listed.
- A cord made to reach the outlet. At 177 cm (69.7 in), it is meant to plug straight into the wall.
- IP44, protected against water splashes and moisture.
- Control you can reach from your phone. The Boldr Energy app has scheduling, remote access and temperature limits, so if you realize you left it on, you can switch it off from anywhere.
Stay warm and save more. Use code JONES15 to get 15% off your entire order—no strings attached.
Upgrade your comfort with a Kelvin today
Bottom Line
The safest space heater is the one with overheat protection and a lab label, placed three feet from anything that can burn, plugged directly into the wall and turned off when you sleep. Type matters less than that. Kelvin is built around those factors, and the rules still apply to it.